纳米氧化物颗粒对水基钻井液润滑性能影响的试验研究          下载免费PDF全文

陈朝然  刘宝昌  刘时琦 《探矿工程》2016,43(3):27-32

通过在水基钻井液中添加纳米氧化物颗粒,来改善其润滑性能。选用了Al2O3、TiO2及SiO2三种纳米氧化物颗粒作为钻井液改性添加剂,利用极压润滑仪及销盘摩擦磨损实验仪研究了添加不同种类和浓度纳米颗粒氧化物对水基钻井液的润滑性能及减摩效果的影响。结果表明,所添加的3种球形纳米颗粒均有润滑减阻减摩的效果,其中SiO2颗粒的钻井液的润滑性能、滤失性能以及减摩效果都是最好的。当纳米SiO2颗粒加量为0.4%时,滤失量最小,润滑系数降低率达到15.6%,摩擦系数降低率为32.0%,磨痕轨迹平滑,减摩效果最为明显。当纳米颗粒浓度超过0.5%时,减摩效果降低,磨盘脱层磨损明显。  相似文献   

Underwater Navigation Based on Real-Time Simultaneous Sound Speed Profile Correction   总被引：1，自引：0，他引：1  

Kai Zhang  Yong Li  Jianhu Zhao  Chris Rizos 《Marine Geodesy》2016,39(1):98-111

Precise sound speed profile (SSP) information is critical when using sonar for underwater terrain navigation. Nevertheless, acquiring SSP information in real-time is difficult, especially in underwater navigation environment. To account for this problem, this paper presents an underwater navigation method that applies real-time SSP correction to the terrain measurements. The method uses a probe to measure the surface sound speed simultaneously. Meanwhile, redundancy of topographic measurement data is exploited to derive the equivalent SSP information. The acquired equivalent SSP is updated continuously with particle filter algorithm. The terrain measurements can be corrected in real-time with the equivalent SSP to improve the performance of underwater terrain navigation. By removing the impact of inaccurate SSP from the terrain measurements, the proposed method can achieve precise and robust underwater navigation result without using an underway-profiling instrument. Simulated results confirm the good performance of the proposed method.  相似文献   

Effects of Mudstone Particle Content on Shear Strength of a Crushed Sandstone–Mudstone Particle Mixture     

Jun-Jie Wang  Zhen-Feng Qiu  Wen-Jie Deng  Hui-Ping Zhang 《Marine Georesources & Geotechnology》2016,34(4):395-402

The present study focuses on the shear strength, deformation, and particle crushing of sand which is mixed by crushed sandstone and mudstone particles. Two triaxial tests—one for unsaturated specimens and the other for saturated specimens—were performed, along with sieve analysis tests. Results obtained from the triaxial tests indicate that, with the increment of the mudstone particle content by weight, the angle of internal friction decreases, the cohesion increases and then decreases, and both the initial angle of shearing resistance at the atmospheric pressure and decremental angle increase and then decrease. Compared to the unsaturated specimens, the deviator stress or normalized deviator stress of the saturated specimens at the same axial stress may decrease due to the wetting action. Thus, the shear strength of the tested materials may be reduced by the wetting action. Results of sieve analysis tests indicate that the mixing of some mudstone particles into the sandstone particle mixture may reduce the amount of particle crushing, but the wetting action may increase the amount. The amount of the crushed particle may arrive at a minimum of 40% of mudstone particle content by weight.  相似文献   

基于颗粒识别分析系统的碎屑流堆积物颗粒识别和统计方法研究          下载免费PDF全文

陈达  许强  郑光  彭双麒  王卓  何攀 《水文地质工程地质》2021,48(1):60-69

碎屑流堆积物颗粒识别和统计是碎屑流灾害的研究重点。文章基于图像处理孔隙（颗粒）及裂隙图像识别与分析系统（PCAS）,以贵州纳雍普洒村崩塌-碎屑流为例,结合纳雍崩塌堆积物粒径实测结果,通过阐释识别过程中阈值、孔喉封闭半径、最小孔隙面积的参数意义,研究PCAS软件在碎屑流颗粒识别与统计中的应用,并提出了颗粒识别时这些参数的选取方法。分析结果表明:（1）PCAS能自动准确地识别碎屑流堆积物颗粒与孔隙,相比人工计数更精细,所识别堆积物各区小颗粒比重较大,0～2 m颗粒粒径各区占比都在50%以上;（2）当阈值为170（像素）时能获得精细的二值图像,颗粒与孔隙得到了准确地区分;（3）不同参数取值下获得堆积物颗粒粒径分布结果不同,碎屑流堆积物颗粒识别宜采用较大的孔喉封闭半径和较小孔隙面积,当二者比值为3/30（像素）时能更好地反应颗粒粒径分布情况;（4）PCAS具有较高的可行性,统计结果显示,各粒径含量变化趋势与人工统计相近,两种统计方法各粒径占比、分布规律基本吻合,说明利用PCAS可以实现对崩塌碎屑流颗粒粒径分布的高效便捷分析。  相似文献   

基于非均质地层参数表征的颗粒流模型构建          下载免费PDF全文

夏余宏烨  孙平贺  伍新民  盛汉洋  王心龙  张绍和 《探矿工程》2021,48(S1):52-60

非均质地层参数的获取与表征方法是浅层地质体改造的重要依据。基于非均质地层的地质建模,表征具有随机不确定性和模糊不确定性的土体表观参数和物理力学参数。利用 Weibull 分布统计描述局部地层信息,并应用Diamond-Square分形插值方法,结合差分盒子维计算非均质地层分形维数,进一步合理演算整体地层参数。采用PFC3D数值模拟软件,结合马尔科夫链蒙特卡洛方法采样数据,对非均质地层块石颗粒及土颗粒进行建模。通过非均质地层模拟结果,发现其破坏过程与应力应变曲线要比均质土体复杂得多,由于块石大颗粒的含量、分布特性对土样力学性质影响显著。本文建模方法有助于非均质地层参数表征研究。  相似文献   

基于离散元模拟的二元颗粒柱坍塌特性研究     

崔溦  魏杰  张贵科  李宏璧 《岩土力学》2021,(1):280-290

常见的地质灾害如滑坡、泥石流、岩崩等通常都涉及不同形状的颗粒物质运动,这些形状不同的颗粒又多具有不同的尺寸和含量。基于典型的颗粒柱坍塌试验,首先根据试验方法确定了离散元模拟所需的各项参数,然后采用随机多面体方法生成了可控制长细比的大颗粒,利用离散元法就不同大颗粒含量下形态变化对二元颗粒柱坍塌特性的影响开展研究,研究结果表明:(1)利用离散元法可以较好地重现室内试验中小球和多面体组成的二元颗粒系统的颗粒柱坍塌过程;(2)在不同长细比的不规则大颗粒和小球组成的二元颗粒柱系统中,当大颗粒含量高于临界含量值20%时,二元颗粒柱坍塌持续的时间随非球形大颗粒长细比的增加而增加;(3)在不同长细比的不规则大颗粒和小球组成的二元颗粒柱中,当大颗粒含量高于临界含量值20%时,在相同百分比的大颗粒含量下,大颗粒长细比的增加会提高大颗粒平均配位数以及降低颗粒的运动能力,大颗粒间形成更强的互锁作用,降低了颗粒柱的整体流动性,使其最终堆积高度更高、最大跑出距离更短以及更小的归一化动能峰值。(4)在不同长细比的不规则大颗粒和小球组成的二元颗粒柱中,小颗粒可以较为明显降低大颗粒间摩擦及互锁作用,增加流动性,降低大骨料形态对坍塌过程的影响。  相似文献   

穿透性地球化学在干旱戈壁荒漠覆盖区的应用 ——甘肃花牛山铅锌矿试验实例     

刘汉粮  张必敏  王学求  孙彬彬  张振海  刘东盛 《地球学报》2021,42(4):545-554

干旱戈壁荒漠区地处我国西北部地区,天山、北山、祁连山三大多金属成矿带横贯其中,成矿条件优越,找矿尤其是找隐伏矿的潜力巨大,但受风成砂土的影响,很难获知覆盖层下方的矿化信息.穿透性地球化学已被证实是有效寻找隐伏矿的方法,其被定义为能探测深部隐伏矿体发出的直接信息的勘查地球化学理论与方法技术.笔者在花牛山铅锌矿开展土壤微细粒全量测量、金属活动态测量(水溶态测量、黏土吸附态测量、铁锰氧化物态测量)和地电化学测量多种穿透性地球化学勘查方法实测工作,结果表明,5种测量方法分析数据主成矿元素(铅、锌)异常衬度高,变异系数大,富集成矿可能性大,地球化学异常与深部隐伏矿体位置吻合,相比较而言,土壤微细粒全量测量效果最好,黏土吸附态测量、铁锰氧化物态测量和地电化学测量效果较好,水溶态测量效果稍差;所选方法技术针对干旱戈壁荒漠区寻找隐伏铅锌矿是有效的.气固介质中内生条件下的纳米金属微粒的发现为利用土壤作为采样介质的穿透性地球化学方法技术(土壤微细粒测量、金属活动态测量)提供了理论基础.电提取泡塑载体中大量的微米级的黏土矿物颗粒发现,以及微量元素异常与铁、铝等常量元素异常高度一致,初步推断地电化学测量提取过程是对黏土矿物颗粒选择性吸附过程.  相似文献   

Cavity expansion analyses of crushable granular materials with state‐dependent dilatancy     

M. J. Jiang  Y. G. Sun 《国际地质力学数值与分析法杂志》2012,36(6):723-742

Crushability is one of the important behaviors of granular materials particularly under high stress states, and affects both the deformability and strength of the materials that are in essence associated with state‐dependent dilatancy. In this presentation, first, a new critical state model is proposed to take into account the three different modes of compressive deformation of crushable granular materials, i.e. particle rearrangement, particle crushing and pseudo‐elastic deformation. Second, the governing equations for cavity expansion in crushable granulates are introduced, in which the state‐dependent dilatancy as well as the bounding surface plasticity model are used. Then, the procedure to obtain semi‐analytical solutions to cavity expansion in the material is described in detail, in which a commercial differential equation solver is employed. Finally, cavity expansion analyses are carried out on Toyoura sand, a well‐documented granular material, to demonstrate the effects of crushability and state‐dependent dilatancy. The study shows that particle crushing does occur at both high stress and critical states and affects the stress fields and the deformation behavior of the material surrounding the cavity in association with state‐dependent dilatancy. This leads to conclusion that particle crushing and state‐dependent dilatancy have to be taken into account when cavity expansion theory is used to interpret cone penetration tests and pressuremeter tests. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

Numerical analysis of the effect of natural microcracks on the supercritical CO2 fracturing crack network of shale rock based on bonded particle models          下载免费PDF全文

Peihuo Peng  Yang Ju  Yongliang Wang  Shaoqin Wang  Feng Gao 《国际地质力学数值与分析法杂志》2017,41(18):1992-2013

The problem of predicting the geometric structure of induced fractures is highly complex and significant in the fracturing stimulation of rock reservoirs. In the traditional continuous fracturing models, the mechanical properties of reservoir rock are input as macroscopic quantities. These models neglect the microcracks and discontinuous characteristics of rock, which are important factors influencing the geometric structure of the induced fractures. In this paper, we simulate supercritical CO₂ fracturing based on the bonded particle model to investigate the effect of original natural microcracks on the induced‐fracture network distribution. The microcracks are simulated explicitly as broken bonds that form and coalesce into macroscopic fractures in the supercritical CO₂ fracturing process. A calculation method for the distribution uniformity index (DUI) is proposed. The influence of the total number and DUI of initial microcracks on the mechanical properties of the rock sample is studied. The DUI of the induced fractures of supercritical CO₂ fracturing and hydraulic fracturing for different DUIs of initial microcracks are compared, holding other conditions constant. The sensitivity of the DUI of the induced fractures to that of initial natural microcracks under different horizontal stress ratios is also probed. The numerical results indicate that the distribution of induced fractures of supercritical CO₂ fracturing is more uniform than that of common hydraulic fracturing when the horizontal stress ratio is small.  相似文献   

An improved SPH method for saturated soils and its application to investigate the mechanisms of embankment failure: Case of hydrostatic pore‐water pressure     

Ha H. Bui  Ryoichi Fukagawa 《国际地质力学数值与分析法杂志》2013,37(1):31-50

The method of smoothed particle hydrodynamics (SPH) has recently been applied to computational geomechanics and has been shown to be a powerful alternative to the standard numerical method, that is, the finite element method, for handling large deformation and post‐failure of geomaterials. However, very few studies apply the SPH method to model saturated or submerged soil problems. Our recent studies of this matter revealed that significant errors may be made if the gradient of the pore‐water pressure is handled using the standard SPH formulation. To overcome this problem and to enhance the SPH applications to computational geomechanics, this article proposes a general SPH formulation, which can be applied straightforwardly to dry and saturated soils. For simplicity, the current work assumes hydrostatic pore‐water pressure. It is shown that the proposed formulation can remove the numerical error mentioned earlier. Moreover, this formulation automatically satisfies the dynamic boundary conditions at a submerged ground surface, thereby saving computational cost. Discussions on the applications of the standard and new SPH formulations are also given through some numerical tests. Furthermore, techniques to obtain the correct SPH solution are also proposed and discussed throughout. As an application of the proposed method, the effect of the dilatancy angle on the failure mechanism of a two‐sided embankment subjected to a high groundwater table is presented and compared with that of other solutions. Finally, the proposed formulation can be considered a basic formulation for further developments of SPH for saturated soils. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献